Posts
Thursday, June 9, 2011
Baby Card
Just a quick card that I made the other day! I have 3 family members and 1 friend who is pregnant, so I am going to be making a SLEW of these cards!!! This is NOT MY IDEA...but it is my color creation and I did make the card. I don't remember exactly where found the measurements, but if you email me, I can give them to you!!!
Subscribe to:
Post Comments (Atom)
3 comments:
Very cute baby card. I recognize the embossing as swiss dots. You indicate that you will send directions/size info if we email but I did not find on your site where to enter my email so it is below.
Melissa
"Sunshine HoneyBee"
http://createdbysunshinehoneybee.blogspot.com
sunshine_honeybee2004@yahoo.com
Whoops! An email may be helpful, LOL! Its Jessica.rose.Wilson@gmail.com I will email you the measurements as soon as I get home tonight: )
Ok, finally found instructions that I used. It was on April's Stamping Zone!
"Cut CS 4 1/4 x 11, Score at 5 1/2. Simple A2 card fold at the top
From the fold line on both sides measure down 1 3/4", make a mark
At that 1 3/4" mark measure in towards the center 3/4" on both sides
Now from the inside portion of that 3/4" mark use a ruler and make a line from there down to the corner. This gives you the body angle.
Using your snips cut the 3/4" line, now you have your sleeve.
Cut from there down, now you have the body
Use the 1 3/8" circle punch and punch a half circle for the neck hole
And I just eye balled for the leg holes. I did touch the corner to the opposite side of the punch
Then use the 1 3/8 punch and punch a color for the trim and then punch around that circle
with the 1 3/4 scalloped punch.
Adhere these as the fancy trim around the neck and leg holes."
Thats all!!
Post a Comment